MV7i Smart Microphone & Interface
Create content with fewer pieces of gear. Elevate your setup for 2-channel audio recording with the MV7i, a dynamic USB-C microphone with a built-in audio interface.
First-of-its-kind dynamic USB microphone with a built-in XLR & ¼” interface for digital recording of 2 channels without the need for an external audio interface.
Optimised frequency response for rich and natural vocal reproduction.
Compatibility with Desktop, Tablet & Smartphone via USB-C Output.
Comes with a suite of advanced DSP features, which are applicable to both the MV7i and any XLR microphone you connect.
Multi-Color LED Touch Panel / Live Meter
Full Touch-to-Mute Panel.
Zero-Latency Audio Monitoring and Playback.
Flexible Recording Output Modes.
MOTIV Mix™ & MOTIV Mobile Apps Integration.
Rugged, all-metal construction for outstanding reliability.
System Requirements
| Windows | Windows 10 and higher, minimum 8 GB of RAM, 20% or more hard disk space. |
| Macintosh | MacOS 12 and higher, 8 GB of RAM, 20% or more hard disk space. |
| iOS | iOS 16 and higher (USB-C devices only) |
| Android | Android 12 and higher |
| MFi Certified | Yes |
Specifications
| MICROPHONE | |
| Type | Dynamic (moving coil) |
| Polar Pattern | Unidirectional (cardioid) |
| Frequency Response | 50 Hz to 16,000 Hz |
| Maximum SPL | 128 dB SPL |
| Sensitivity at Minimum Gain | -33 dBFS/Pa at 1 kHz (1 Pa = 94 dB SPL) |
| Adjustable Gain Range | 0 to +36 dB |
| Digital Noise Floor 20 Hz to 20kHz, A-weighted | -118dBFS (with Auto Level Mode and Real Time Denoiser enabled) |
| INPUT | |
| Supported Types | XLR, 1/4″ TS, 1/4″ TRS |
| Input Impedance (XLR) | 5.8kΩ |
| Input Impedance (1/4″) | 1MΩ |
| Adjustable Gain Range | 0 to +60 dB 0 to +40 dB (stereo mode) |
| Maximum Input Level | XLR: -14dBV 1/4″: 7dBV |
| Digital Noise Floor 20 Hz to 20kHz, A-weighted | XLR: -118dBFS (with Auto Level Mode and Real Time Denoiser enabled) 1/4″: -97dBFS (@10dB gain) |
| Phantom Power | Yes (+48VDC) |
| SYSTEM | |
| On-Board DSP | Auto Level Mode with SmartGate, Digital Popper Stopper, Real-time Denoiser, Tone Slider, Reverb, Compressor, Limiter, High-Pass Filter |
| USB Host Requirements | USB Audio Class 2 (UAC2), Powered through USB Bus Power (USB 2.0 or higher) |
| A/D Converter | 24-bit, 48kHz (16-bit, 44.1kHz support for iOS) |
| Headphone Output | 3.5 mm (1/8″) |
| Connector Type | USB-C port |
| Stand Mount Type | 5/8″-27 thread mount |
| Housing | Diecast aluminum |
| Net Weight | 567g (1.25 lbs) |
| Dimensions | Microphone Length: 169.5mm Microphone Diameter: 90mm (in yoke, incl. knurled knobs) Mic in Yoke: 164mm H x 207mm L x 90mm D (H = mic and yoke assembly 90-degrees to one another, measured from table to top of the mic) |
| Accessory Cable | Includes one (1) 3m USB-C to USB-C cable |
| Software Compatibility | MOTIV Mix™ Desktop App, MOTIV Audio iOS & Android Apps |
